
Wadfow WBN3532 Pneumatic Air Brad Nailer Ga18, 10-30mm
β±1,300as of Aug 30, 2026
COD Β· Shopee-protected payment
How we reviewed this: we read the Shopee PH listing, checked the listed specs, and went through 60 owner ratings.
Wadfow WBN3532 Pneumatic Air Brad Nailer Ga18, 10-30mmOur Best value pneumatic: a cast aluminium 18 gauge brad nailer firing 10mm to 30mm brads at around β±1,300, sold through Wadfow's own store. The catch is the 30mm ceiling and no nails in the box.

β±1,300as of Aug 30, 2026
COD Β· Shopee-protected payment
| Brand | Wadfow |
|---|---|
| Type | Pneumatic brad nailer |
| Price | β±1,300 (as of Aug 30, 2026) |
| Shopee owner rating | 4.9 β from 60 Shopee ratings |
| Shop | WADFOW |
| Units sold | 204 |
Specs per the Wadfow Philippines WBN3532 listing
| Type | Pneumatic brad nailer |
|---|---|
| Model | WBN3532 |
| Nail gauge | 18 gauge (Ga18) |
| Nail length | 10mm to 30mm |
| Power source | Compressed air |
| Body | Cast aluminium with a rubber over-grip |
The Wadfow WBN3532 is our Best value pneumatic: a cast aluminium 18 gauge brad nailer firing 10mm to 30mm brads, at around β±1,300 through Wadfowβs own Shopee store.
A proper metal air gun at the price of a plastic corded one.
Every pneumatic nailer in this roundup is built around a cast metal body, and that is one of the quiet reasons trade users like air tools. Drop a cast aluminium gun on a concrete floor and it scuffs. Drop a plastic-shelled corded gun and it can crack at the seam. This is the cheapest way onto that build quality.
It also has a rubber over-grip on the handle, which sounds cosmetic until you fire a hundred brads in a row. Recoil goes into your palm on every shot, and a bare metal handle stops being funny quickly.
The nail range is where it gets interesting. Most brad nailers start at 15mm. This one starts at 10mm, which is genuinely useful for thin panelling and small picture frames where a 15mm brad would come out the far side.
30mm is the ceiling, and that is the limitation to sit with before buying.
Thirty millimetres covers trim, moulding, frames, thin plywood and cabinet backs. It does not cover furniture assembly in thicker stock, where 40mm to 50mm is what the joint asks for. The Ingco pneumatic in this ranking reaches 50mm for about β±800 more, and that gap is exactly the difference between a trim gun and a general woodworking gun.
No nails come in the box, where the Ingco ships with 1,000. That is a small cost, but it is also a day of waiting if you had planned to start immediately.
And Wadfow does not publish an operating pressure or air consumption figure, so match it to your compressor with the sellerβs help.
Around β±1,300 as of August 30, 2026. Check the latest price on Shopee.
As a gun, this is the best price per peso in the pneumatic half of our ranking: a cast metal body, a rubber grip, a brand store behind it, at the same price as the plastic-shelled Mitsushi corded gun.
As a setup, remember the compressor. If you already own one, this is close to a bargain. If you do not, the honest comparison is against a corded gun at the same price that needs nothing else, and the corded gun wins.
60 owner ratings at 4.9, sold direct by Wadfow rather than a reseller.
Buy this if you own a compressor and your work is trim, moulding, frames and panel backs rather than furniture. It is the right choice for anyone who wants a metal tool at a plastic-tool price, and the 10mm short end makes it particularly good for delicate work. If you need to reach 50mm, or you have no compressor, look elsewhere in the ranking.
If you want the same air setup but a wider 15mm to 50mm range and 1,000 brads included, the Ingco ABN15501 is our Best pneumatic. If you do not own a compressor, the Powerhouse PH-ENF30-HD plugs straight into a socket and needs nothing else.
See how it ranks against the rest in our best nailer guns in the Philippines roundup, or compare power sources in our nailer gun buying guide.
See how it compares with the other top picks in our nailer guns comparison.
18 gauge brads from 10mm to 30mm. The 10mm short end is genuinely useful and unusual: thin panelling, picture frames and small mouldings often need a nail shorter than the 15mm minimum on bigger guns, where a longer brad would punch straight through the back. The 30mm ceiling is the trade, and it rules out furniture assembly in thicker stock.
Yes. It is a pneumatic gun, so it needs a compressor, an air hose and a quick coupler. If you do not already own those, the total cost of getting this gun working is well above a corded electric nailer, which needs only a wall socket. Buy pneumatic when the compressor is already in the workshop.
Because tools get dropped. A cast aluminium body takes a fall onto concrete and carries on, where a plastic-shelled tool cracks at the seam. Every pneumatic gun in this roundup uses cast metal, which is one of the quiet advantages of the format, and this one is the cheapest way into it.
Yes. Wadfow is an established tool brand with its own Shopee store in the Philippines and a product catalogue that publishes model numbers and specifications, which is more than several sellers in this category manage. Buying through the brand store rather than a reseller means the warranty goes to Wadfow directly.
Disclosure: Product Choicest is reader-supported. We may earn a commission when you buy through our Shopee links, at no extra cost to you. Read affiliate disclosure.