
Lasco Zigbee 3.0 3 Gang Smart Touch Light Switch, Black
โฑ1,500as of Aug 12, 2026
COD ยท Shopee-protected payment
How we reviewed this: we read the Shopee PH listing, checked the listed specs, and went through the owner reviews.
Lasco Zigbee 3.0 3 Gang Smart Touch Light Switch, BlackThree switched circuits on one Philippine-brand Zigbee panel with no neutral wire needed, which works out cheaper per circuit than the 2 gang, but it is the priciest switch here and still needs a gateway.

โฑ1,500as of Aug 12, 2026
COD ยท Shopee-protected payment
| Brand | Lasco |
|---|---|
| Type | Smart light switch |
| Price | โฑ1,500 (as of Aug 12, 2026) |
| Shopee owner rating | 4.9 โ from 19 Shopee ratings |
| Shop | lascohome |
| Units sold | 115 |
Specs per Lasco Philippines product documentation
| Type | Smart light switch |
|---|---|
| Connectivity | Zigbee 3.0 |
| Neutral wire | Not required |
| Hub | Lasco Zigbee 3.0 gateway required |
| Gangs | 3 gang |
| Apps | Lasco, Smart Life and Tuya |
| Voice control | Alexa, Google Assistant and Siri Shortcuts |
| Body | Flame-retardant, tempered glass touch panel |
The Lasco Zigbee 3.0 3 gang switch is our Best Three-Gang Panel: three switched circuits, Zigbee 3.0, no neutral wire, and a Philippine brand behind it. Around โฑ1,500 as of August 12, 2026.
Check before you spend anything, because this is where the money goes.
A 3 gang panel does not create circuits. It switches ones that are already wired to that box. Unscrew your existing plate and count the wires leaving it. If two lamp wires go out, a 3 gang panel gives you two working buttons and one dead one.
Where it does fit, it is the tidiest thing here: a sala with ceiling lights, accent lights and a porch light running off one plate.
Per circuit, clearly yes.
At around โฑ1,500 for three gangs, that is about โฑ500 per switched circuit. The 2 gang works out at around โฑ700. Same brand, same gateway, same install, more lights covered. If the wires are there, this is the one to buy.
The same two as every Lasco switch, and both scale with gang count.
You need the Lasco Zigbee 3.0 gateway, which is a separate purchase before anything works.
And Lasco states it will not drive fluorescent lamps, smart bulbs, color lights, gradient lights or light strips. With three circuits that restriction applies three times, and each one also needs enough bulb load behind it to keep the switch stable. Plan for ordinary LEDs on all three.
Also worth saying: only 19 owners have rated it so far, so the long-term picture is thin.
Around โฑ1,500 as of August 12, 2026, plus the gateway. Check the latest price on Shopee.
It is the most expensive single switch in this ranking. It is also the only three-circuit panel here from a brand with a Philippine office, and per circuit it undercuts its own 2 gang sibling. Sulit if you are fitting a house you own; hard to justify for one room.
Buy this if a main room already has three lamp circuits wired to one box, and you want a local brand to stand behind the part. It is the right choice for a sala or a main hallway in a home you are staying in. For a single light, buy something far cheaper.
See how it ranks in our best smart light switches in the Philippines roundup, or work out your gang count with our smart light switch buying guide.
Only two circuits at the box? The Lasco Zigbee 3.0 2 gang switch is the same switch one gang down. Want up to 4 gang for a fraction of the price? The SMATRUL RF433 UK glass touch switch is around โฑ199 and needs no gateway, though support is an overseas Shopee inbox.
See how it compares with the other top picks in our smart light switches comparison.
Only if three separate lamp wires already run to that box. A 3 gang panel does not create circuits, it switches ones that exist. Open the plate and count the wires going out before you order, because a third button with nothing behind it is just a dead button.
Per circuit, yes. It costs a little more but switches half again as many lights, so each circuit works out cheaper. If your box has three wires, this is the one to buy.
Lasco states it will not drive fluorescent lamps, smart bulbs, color lights, gradient lights or light strips. With three gangs that limit applies three times over, and each circuit also needs enough load to keep the switch happy. Plan on ordinary LED bulbs throughout.
Yes. Zigbee needs a hub, and Lasco specifies its own Zigbee 3.0 gateway. Your first Lasco switch therefore costs the switch plus the gateway. If you are fitting several rooms, that cost spreads out fast.
Disclosure: Product Choicest is reader-supported. We may earn a commission when you buy through our Shopee links, at no extra cost to you. Read affiliate disclosure.