
Masflex Stainless Steel Dish Rack with Drain Tray
โฑ599as of Aug 3, 2026
COD ยท Shopee-protected payment
Disclosure: Product Choicest is reader-supported. We may earn a commission when you buy through our Shopee links, at no extra cost to you. Learn more.
Bare stainless wire with nothing to chip and nothing to trap grime, split between upright plate slots and wave supports for cups. The value pick in this roundup.

โฑ599as of Aug 3, 2026
COD ยท Shopee-protected payment
| Brand | Masflex |
|---|---|
| Type | Dish rack |
| Price | โฑ599 (as of Aug 3, 2026) |
| Owner rating | 5.0 โ from 9 reviews |
| Shop | SM Store |
| Units sold | 16 |
Bare stainless wire with nothing to chip and nothing to trap grime, split between upright plate slots and wave supports for cups. The value pick in this roundup.
A split deck: upright plate slots on one half, wave supports for cups and bowls on the other. Splitting it that way means both dish types get the orientation that actually drains them, plates on edge and cups upside down, instead of everything lying in a flat basket. Underneath sits a white drain tray. There is no utensil caddy, which is the one thing you notice is missing, but everything the rack does include is the right shape for the job.
The point of this rack is the material. Bare stainless wire has no coating to chip, which removes the single failure mode that ends the coated and chrome racks in this category. It also has nothing to trap grime, so it rinses clean in seconds rather than needing a scrub around flaking paint. The trade-off is gauge: the wire is thin, and a row of heavy plates loaded across the middle of the deck flexes it. Load toward the frame edges and it is fine.
Around โฑ599 as of August 3, 2026. Check the latest price on Shopee. That is the cheapest branded steel rack here and it undercuts most of the plastic drainers, which makes it the clearest value in the category. You give up the utensil caddy and some frame rigidity. For anyone who has thrown out a rusted rack, paying less for a material that does not have the problem is an easy call.
Buy this if you want a rust-resistant rack for the least money and you already have somewhere for cutlery. If you need a caddy and a sturdier deck, step up to the aluminum or two-tier racks.
See how it ranks in our best dish racks in the Philippines roundup, or work out which type suits your kitchen in our dish rack buying guide.
Want the rust resistance with cutlery caddies included? The Masflex aluminum dish rack is the one to compare. Prefer stainless that sits over the sink instead of on the counter? The VRH over-sink dish rack is the one to compare.
See how it stacks up against our top pick in the head-to-head Masflex 2-Tier Dish Rack with Drip Tray vs Masflex Stainless Steel Dish Rack with Drain Tray, or browse the full dish racks comparison.
For a rack that lives beside a wet sink, yes. Coated racks rust from the moment the coating chips, usually at a weld. Bare stainless has no coating to fail, so its resistance does not depend on keeping a finish intact.
No. There is no caddy at all, so spoons and forks lie flat in the basket or live somewhere else. That is the main omission at this price.
One half of the deck has wave-shaped wires that cradle cups, mugs, and bowls upside down so water runs out. The other half is upright slots for plates.
It handles everyday dishes, but the wire gauge is thin and flexes noticeably when heavy plates are loaded across the middle. Spread the weight toward the frame edges.