
Xiaomi Electric Precision Screwdriver 24 S2 Steel Bits
₱1,800as of Jul 31, 2026
COD · Shopee-protected payment
Disclosure: Product Choicest is reader-supported. We may earn a commission when you buy through our Shopee links, at no extra cost to you. Learn more.
Our Best for Electronics pick: 24 S2 steel bits covering Torx, tri-wing and pentalobe heads for around ₱1,800, built for phones and laptops rather than furniture.

₱1,800as of Jul 31, 2026
COD · Shopee-protected payment
| Brand | Xiaomi |
|---|---|
| Type | Electric screwdriver |
| Price | ₱1,800 (as of Jul 31, 2026) |
| Owner rating | 4.9 ★ from 236 reviews |
| Shop | Xiaomi Mi Online |
| Units sold | 791 |
Specs per Xiaomi's published product page
| Type | Electric screwdriver |
|---|---|
| Bits | 24 x S2 steel precision bits |
| Max manual torque | 3 Nm |
| No-load speed | 170 rpm |
| Battery | 350 mAh lithium |
| Charging time | 160-200 minutes |
| Screws per charge | 400+ |
| Gearbox | All-metal |
| Charging | USB-C |
| Case | Aluminium alloy |
The Xiaomi electric precision screwdriver is our Best for Electronics pick: 24 S2 steel bits and an all-metal gearbox for around ₱1,800. It’s the right tool for a phone, and the wrong one for a bookshelf.
The bit set is the reason to buy it. Twenty-four S2 steel bits at 60HRC hardness, covering Phillips, pentalobe, hex, Torx including pin-hole security Torx, tri-wing, Y-type, W-type and slotted heads.
That range matters because electronics manufacturers use awkward screws deliberately. A pentalobe on an iPhone, a tri-wing in a game controller, a security Torx in a laptop base: a normal driver set opens none of them. This one does.
Here’s the number people misread, so let’s be precise. The 3Nm figure is maximum manual torque, what you can apply turning the tool by hand as a normal screwdriver. Powered torque is far lower by design.
That’s not a flaw, it’s the point. Precision work needs control, not force. Driving a screw hard into a phone chassis strips the thread or cracks a board. Its 170rpm no-load speed is the slowest here for the same reason.
If your jobs are furniture and cabinet hinges, this is the wrong tool and you want a general screwdriver with 4-6Nm instead.
Better than the price suggests. An all-metal gearbox and a magnetic motor, where most tools this size use plastic gearing. A 350mAh cell rated for 400-plus screws per charge, over USB-C in 160 to 200 minutes. The aluminium alloy case keeps 24 tiny bits from scattering through a drawer, which sounds trivial until you lose the pentalobe.
One reservation worth stating plainly: we could not verify that either Philippine listing is an authorised Xiaomi store, despite the shop names. Buy it on the tool, not on an assumed warranty channel.
Around ₱1,800 as of July 31, 2026. Check the latest price on Shopee. It’s the most expensive pick in this category, and it’s only sulit if you actually work on electronics.
For that use, it genuinely is: a comparable S2 precision bit set alone costs a good fraction of this, and you’d still be turning it by hand. For furniture, you’d be paying double the INGCO for a tool with less driving power.
Buy this if you repair phones, laptops, consoles, or drones, or you’re the person in the family everyone brings broken gadgets to. It’s the right choice for electronics work and the wrong one for carpentry. See how it ranks in our best electric screwdrivers in the Philippines roundup, or browse more on our Home Improvement page. Our electric screwdriver buying guide explains the precision-versus-general split.
For furniture, fixtures, and cabinet work, the INGCO 4V/8V cordless screwdriver is our Best Overall at around ₱891 with up to 6Nm and a 15+1 torque clutch. Want a cheap general kit with sockets included? The Mitsushi ML100B 48pcs kit is around ₱329.
See how it stacks up against our top pick in the head-to-head INGCO Lithium-Ion Cordless Screwdriver Set 4V / 8V with LED Work Light vs Xiaomi Electric Precision Screwdriver 24 S2 Steel Bits, or browse the full electric screwdrivers comparison.
Phones, laptops, game consoles, glasses, watch straps, drone parts, and small appliances. The 24 bits cover Phillips, pentalobe, hex, Torx (including pin-hole security Torx), tri-wing, Y-type and slotted heads, which is the range that awkward electronics screws actually need.
No, and that's a common misread. The 3Nm figure is the maximum MANUAL torque, what you can apply turning it by hand. Powered torque is far lower by design, because precision work needs control, not force. For furniture, buy a 4-6Nm general screwdriver instead.
Xiaomi rates it at 400-plus precision screws on a full charge from a 350mAh cell, which is far more than a typical repair session needs. Charging takes 160 to 200 minutes over USB-C.
We couldn't verify that either PH listing is an authorised Xiaomi store, despite the shop names. Treat warranty support as uncertain and buy on the tool rather than on an assumed official channel.