4 Best electric screwdrivers in the Philippines (2026)

An electric screwdriver is the tool you reach for far more often than a drill: furniture, hinges, switch plates, and the endless small screws in a house. Here’s how the most popular electric screwdrivers on Shopee Philippines compare.

Torque, bits, and clutch settings

We compared published torque and speed, bit count and steel grade, clutch settings, charging, and what ships in the box, then weighed each against its price. Specs come from manufacturer data where it exists (INGCO, Mitsushi, and Xiaomi all publish), and where a brand publishes nothing we say so rather than repeat a listing’s claim.

Why won’t a normal bit set open a phone?

These look similar and do different jobs.

Precision screwdrivers are for phones, laptops, game consoles, glasses, and drones. What matters is the bit range: pentalobe, tri-wing, security Torx with pin holes, Y-type. Manufacturers use awkward screws on purpose, and a normal driver set opens none of them. Powered torque is deliberately low, because forcing a screw in a phone chassis strips threads and cracks boards.

General screwdrivers are for furniture, cabinet hinges, switch plates, and appliance panels. What matters is torque: 4-6Nm, standard hex-shank bits, and ideally a clutch.

Buy for the jobs you actually do. If it’s both, they’re cheap enough that owning one of each beats compromising.

Furniture assembly takes 4 to 6Nm of torque

Torque is the honest measure of what a general screwdriver can drive.

• Under 3Nm: battery covers, small electronics, appliance panels.
• 3–4Nm: light household screwdriving. Fine for most small jobs, stalls on long screws in hardwood.
• 4–6Nm: furniture assembly, cabinet hinges, switch plates, screws into softwood and plywood. The sweet spot for a household tool.

And a limit worth being clear about: no electric screwdriver replaces a drill. The strongest here is 6Nm, while an entry-level cordless drill does 16Nm and a mid-range one 55Nm with a hammer mode. Screwdrivers drive screws; drills make holes.

Why a clutch matters more than you’d think

A torque clutch caps the driving force, so the tool stops turning before it strips the screw head or sinks a screw straight through a thin cabinet panel. Better tools give you 15 or more settings; most cheap ones give you none.

If you assemble flat-pack furniture or work with soft wood, this is the single feature most worth paying for. It’s the difference between a clean job and a stripped screw you now have to drill out.

Piece counts are not specs

This is the trap in the category, so read the numbers carefully.

Listings lead with “42 pieces” or “48 pieces” because a big number sells. But a piece count tells you nothing about torque, speed, or how long the bits last. Of the five screwdrivers we compared for this list, two publish no torque figure, no speed, and no bit-steel grade at all, and one of those costs five times as much as a better-documented kit with more pieces.

What actually matters in a bit set is the steel. S2 steel at around 60HRC survives tight and seized screws; softer Cr-V bits round off. A 24-bit S2 set can outlast a 42-piece assortment of soft bits.

Pick precision or general first; torque and bit steel come next

Decide precision or general first, because they’re different tools. Precision drivers carry S2 steel bits in pentalobe, tri-wing, and security Torx patterns for electronics, with deliberately low powered torque. General drivers push 4-6Nm through standard bits for furniture and fixtures. Torque then sets what the general tool can do: 4-6Nm is comfortable for household work, 3.5Nm is light-duty, and anything less is for battery covers. A torque clutch is the feature people don’t know to want, capping the force so you stop stripping screw heads. Bit steel matters more than bit count, since S2 at 60HRC survives tight screws that soften cheaper Cr-V. Finally, check what’s in the box, because sockets and a case can be worth more than a slightly higher spec.

None of these replaces a drill. The strongest pick here is 6Nm; an entry-level cordless drill does 16Nm.

A 6Nm INGCO for furniture and a Xiaomi for electronics

INGCO 4V/8V cordless screwdriver wins Best Overall at around ₱891: up to 6Nm, a 15+1 torque clutch, an LED work light, and published specs for both variants. The Mitsushi ML100B 48pcs kit is our Best Budget at around ₱329, with 3.5Nm, a foldable grip, and 8 sockets among its 48 pieces, easily the most tool per peso here. For phones and laptops, the Xiaomi electric precision screwdriver is Best for Electronics at around ₱1,800, with 24 S2 steel bits covering pentalobe, tri-wing, and security Torx heads. The KEELAT 42pcs mini set rounds out the list as Best Compact Kit at around ₱1,700, though it publishes no torque figure.

All prices are as of July 31, 2026.

Budget kits at 3.5 to 6Nm handle most home jobs

Real Shopee PH prices by tier, as of July 31, 2026:

The third tier is the one to be careful with: a high price here does not signal a better tool, only a bigger accessory count.