OneTwoFit 6-hole wall pull-up bar review: built for outdoors

OneTwoFit Wall Mounted Pull Up Bar, 6-Hole Design for Indoor and Outdoor Use

Reviewed by Gabriel Manalo ยท Updated Aug 19, 2026 ยท How we review

Disclosure: Product Choicest is reader-supported. We may earn a commission when you buy through our Shopee links, at no extra cost to you. Read affiliate disclosure.

Quick verdict

Six bolt holes per plate instead of four, and rated for outdoor mounting: the pick for older masonry or a garage wall, at the cost of more drilling.

At a glance

BrandOneTwoFit
TypePull-up bar
Priceโ‚ฑ1,500 (as of Aug 19, 2026)
Owner rating4.8 โ˜… from 317 reviews
ShopOneTwoFit Store
Units sold1K+

Specifications

TypePull-up bar
MountingWall-mounted, 6 bolt holes
UseIndoor or outdoor

Pros and cons

โœ“ Pros

  • Six bolt holes spread the load more than a four-hole plate
  • Rated for outdoor mounting, useful for a garage or terrace

โœ— Cons

  • Six holes mean more drilling and more careful marking to get level
  • Fixed bar height, no adjustment once the plates are bolted

The OneTwoFit 6-hole wall bar is the one to choose when you are not entirely sure about your wall: six bolt holes per plate and an outdoor rating, for around โ‚ฑ1,500 as of August 19, 2026.

When do six holes matter?

When the masonry is old, patched, or simply unknown. Six fixings spread the load across more of the wall than four, which lowers the force on any single anchor. On fresh, solid concrete this is belt and braces. On a wall that has been drilled before, or on older hollow block, it is genuine reassurance.

What does the outdoor rating add?

Options. Being rated for outdoor mounting opens up a garage, a terrace, or a covered exterior wall, which is often where the solid concrete actually is in a Philippine house. Interior walls in newer builds are frequently hollow, so this can be the difference between mounting it and not.

It is not an invitation to ignore maintenance. Check the fixings for rust periodically if it lives outside.

What does it cost you?

Installation effort. Six holes per plate means more drilling and more careful marking, and getting two plates level with twelve total fixings takes patience and a spirit level. Compared with the four-hole version this is a noticeably longer job.

Height is fixed once mounted, as with any bolted bar.

Is it sulit?

At around โ‚ฑ1,500 as of August 19, 2026, it is priced identically to the four-hole model. So the choice is not about money at all, it is about your wall and your willingness to drill twelve holes instead of eight.

Who should buy it

Buy this if your masonry is older or uncertain, or if the solid wall you have is outdoors. Skip it if you have good interior concrete and would rather drill less.

Alternatives to consider

On solid new concrete where four fixings are plenty, the OneTwoFit OT05310 is the same price with half the drilling. If you want grip variety from a wall fixture, the multi-grip wall rack offers several hand positions.

Compare the full ranking in our best pull-up bars in the Philippines roundup, or read the pull-up bar buying guide first.

Compare OneTwoFit Wall Mounted Pull Up Bar, 6-Hole Design for Indoor and Outdoor Use

See how it compares with the other top picks in our pull-up bars comparison.

Frequently Asked Questions

Why would I want six holes instead of four?

To spread the load. Six fixings distribute the force across more of the wall, which matters on older masonry or anywhere you are less than certain about the concrete. On new, solid concrete four is usually plenty.

What does an outdoor rating mean in practice?

That the finish is intended to cope with weather, so a garage, terrace or covered outdoor wall is fair game. It does not mean you should ignore rust entirely, so check the fixings periodically.

How much harder is it to install?

Meaningfully. Six holes per plate means more drilling, more marking, and more care getting everything level. Budget extra time, and use a spirit level rather than eyeballing it.

Can I adjust the height afterwards?

No. Like any bolted bar the height is fixed once the plates are in, so decide before you drill. Leave enough clearance to bend your knees at the bottom of a hang.