
INGCO CIDLI12206 12V impact drill review: light drill, light masonry
INGCO 12V Cordless Impact Drill CIDLI12206Disclosure: Product Choicest is reader-supported. We may earn a commission when you buy through our Shopee links, at no extra cost to you. Learn more.
A light 12V drill that adds a real hammer mode and three masonry bits, so light wall work is in scope. Two batteries help, but the chuck is plastic and the charger isn't included.
- Price: ₱2,400 as of Jul 31, 2026
- Biggest pro: Hammer mode plus three masonry bits, so light wall drilling is in scope
- Main catch: Plastic chuck, not the metal chuck INGCO fits to its 20V drills

At a glance
| Brand | INGCO |
|---|---|
| Type | Cordless impact drill |
| Price | ₱2,400 (as of Jul 31, 2026) |
| Owner rating | 4.9 ★ from 80 reviews |
| Shop | ingco |
| Units sold | 80 |
Specifications
Specs per INGCO's published CIDLI12206 data sheet
| Type | Cordless impact drill |
|---|---|
| Model | CIDLI12206 (S12 series) |
| Motor | Not specified |
| Voltage | 12 V (S12 platform) |
| Max torque | 20 Nm |
| Max impact rate | 22,500 bpm |
| Chuck | 0.8-10 mm plastic |
| No-load speed | 0-400 / 0-1,500 rpm |
| Clutch settings | 18+1+1 |
| Battery | 2x 1.5Ah Li-ion (FBLI12153), USB Type-C charging port |
| Charger | Not included |
| In the box | 1x Cr-V 65mm bit, 3x masonry bits, 2 batteries, case |
| Extras | LED work light |
| Warranty | 6 months service warranty (INGCO Philippines) |
Pros and cons
✓ Pros
- Hammer mode plus three masonry bits, so light wall drilling is in scope
- Two 1.5Ah packs, so one charges while the other works
- Type-C charging on the battery, topped up by any phone charger or power bank
- 18+1+1 clutch gives fine control for screws in wood and drywall
- Light 12V body for overhead and in-cabinet work
✗ Cons
- Plastic chuck, not the metal chuck INGCO fits to its 20V drills
- No charger in the box, so a first-time buyer has to add one
- 20Nm is thin for masonry, fine for light block but not structural concrete
- 10mm chuck caps masonry bit size
- INGCO does not label this model brushless, unlike its 20V drills
The INGCO CIDLI12206 is a 12V impact drill: 20Nm, a 22,500bpm hammer mode, and two 1.5Ah batteries for around ₱2,400. It’s the light drill that can still make a small hole in a wall, as long as you keep expectations at hollow block rather than concrete.
What does the hammer mode actually get you?
The 18+1+1 clutch is the giveaway: 18 torque steps, plus a drill setting, plus a hammer setting. In hammer mode the chuck pulses forward at 22,500bpm while it spins, which is what lets a masonry bit chip its way in instead of skating. INGCO includes three masonry bits, so the intent is clear.
Be honest about the ceiling. 20Nm and a 10mm chuck are enough for a curtain rail anchor or a small shelf bracket in hollow block. They are not enough for structural concrete, big anchor bolts, or anything above about 8mm. Ask for more and you’ll burn the bit and the battery.
How is it to hold and to build with?
Very good, and that’s the point of 12V. This is a light, short tool you can hold overhead against a ceiling or work inside a kitchen cabinet without your wrist complaining. It has an LED work light, and the packs charge over USB Type-C, so a phone charger or a power bank tops one up.
The compromise is the plastic chuck, where INGCO’s 20V drills get metal. Plastic grips a little less firmly and wears faster, and hammer mode is exactly the job that wears a chuck. For occasional use it’s fine. For weekly masonry, it’s the part that will loosen first.
Is it sulit?
Around ₱2,400 as of July 31, 2026. Check the latest price on Shopee. Two 1.5Ah batteries is genuinely good value at this price, because one charges while the other works, and most drills in this bracket ship with a single pack.
The subtraction is the charger, which INGCO lists separately. Add that to your basket and this drill sits at the same money as our Best Overall 20V pick, which is brushless, has a 13mm metal chuck, and hits 55Nm. That comparison is the whole decision: pay the same for a light drill that does light walls, or a heavier one that does real ones.
Who should buy it
Buy this if weight and reach matter more than power: apartment repairs, furniture, curtain rails, and the occasional small anchor in hollow block. It’s also a sensible second drill if you already own an S12 charger. See how it ranks in our best cordless drills in the Philippines roundup, or browse more on our Home Improvement page. Our cordless drill buying guide covers the 12V-versus-20V call in more detail.
Alternatives to consider
If you don’t need the hammer mode at all, INGCO’s plainer 12V lithium-ion cordless drill is the same weight class for less, though it ships with only one battery. If walls are the actual reason you’re buying, skip 12V entirely: the INGCO 20V 55Nm brushless drill is our Best Overall at around ₱2,000, with a metal chuck and nearly triple the torque.
Frequently Asked Questions
Can the INGCO CIDLI12206 drill concrete?
It can drill light masonry, and it ships with three masonry bits, but be realistic. 20Nm and 22,500bpm handle hollow block and soft render for small anchors. Structural concrete or anything over 8mm wants a 20V drill with 40Nm-plus and a metal chuck.
Does it come with a charger?
No. INGCO's data sheet lists the charger as a separate item, and the listing photo says so too. You get the drill, two 1.5Ah batteries, bits, and a case. The batteries do charge over USB Type-C, so a phone charger works in a pinch.
What's the difference between CIDLI12206 and CDLI12206?
The 'I' is impact. CIDLI12206 has the hammer mode and an 18+1+1 clutch; CDLI12206 is the plain drill with 15+1 and no hammer setting. The model codes look almost identical, so read carefully before ordering.
Is a plastic chuck a dealbreaker?
Not at this size. A plastic chuck grips lighter and wears faster than metal, which matters when a masonry bit is hammering. For occasional household holes it's fine; for weekly wall work, step up to a 13mm metal chuck.



