Tolsen 45087 welding mask review: best for frequent welding

The Tolsen 45087 is our Best for Frequent Welding pick: the largest window in this comparison at 92 x 42 mm, and the only helmet here that adjusts shade, sensitivity, and delay together.

The most complete control set here

Three adjustments, and this is the only helmet in the comparison with all three.

Shade, variable DIN 9 to 13, from a DIN 4 light state. That covers TIG at the light end through heavy stick at the dark end.

Sensitivity, adjustable. This sets how strong an arc must be to trigger the lens. Turn it up for low-amp TIG where a weak arc might not register; turn it down if shop lights or a neighbour’s arc cause flicker. Most helmets at any price simply do not offer it.

Delay, 0.2 to 0.8 seconds, continuously adjustable. Short for tacking, long for hot heavy work.

The shade knob is mounted on the outside, so you change shade without removing the helmet and opening it. On a job that alternates processes that is a genuine convenience rather than a spec-sheet flourish.

The window

At 92 x 42 mm this is the largest viewing area here, roughly a quarter more glass than the 90 x 34 mm windows on rivals, and most of the gain is height.

That is exactly where you want it. Following a long bead means seeing ahead of the puddle, and a taller window makes that noticeably easier. On short tacks you will not notice; on a full run you will.

1/25000 s switching is five times faster than the slowest auto-darkening helmet here, though in practice all of these are faster than the eye reacts.

It is CE approved and rated for ARC, TIG, MIG, spot, plasma welding and plasma cutting.

Is it sulit?

Around ₱1,500 as of August 16, 2026. Check the latest price on Shopee.

It costs meaningfully more than the Lotus LTWH300, which offers the same DIN 9-13 shade span. What the extra buys is the bigger window, the sensitivity control, and the external knob, not more protection.

For occasional welding that is not worth it. For someone welding weekly and running long beads, the window and the sensitivity control earn their keep quickly.

Two caveats: no grinding mode, which is a strange omission given how complete everything else is, and the flip-up outer glass is a consumable that pits from spatter over time.

Who should buy it

Buy this if you weld regularly, run long beads, or switch between processes and amperages often enough that an external shade knob saves real time. See how it ranks in our best welding helmets in the Philippines roundup, or browse more on our Home Improvement page. Our welding helmet buying guide explains what each control does.

Alternatives to consider

For occasional welding the Lotus LTWH300 gives you the same DIN 9-13 shade range and an adjustable delay for considerably less, in a smaller window. If you only ever run stick at mid amperage, the INGCO AHM009 fixed at shade 11 is simpler and has a replaceable battery.